FOR SALE: ALBERTA USED / SURPLUS TRANSFER PUMP PACKAGES – CJV1923
Up to 500 m3/d and 360 psi Transfer Pump Packages
Low cost oil or water transfer packages that pump up to 500 m3/day and 360 psi discharge pressure for less than $25k.
If you need to move some oil or water around, or if you have a small disposal site that doesn’t need much pressure, here is a great pump for you. Built by Crimtech in 2007 and only run for a couple of years, each package features a small Seepex progressive cavity pump, sour rated 300# piping c/w mass flow meter, ESD, and various shut downs. Currently hydraulic driven, these can be optionally converted to electric driven. They are all housed inside little 9’ x 7′ buildings with checker plate flooring, Catadyne heat, and a sump.
34
Watch below as Kameron Anderson guides you through these undervalued pump packages.
Extra Value in Each Package
To manufacture a new, basic pump package that would do similar flow/pressure would cost between $30k-40k. but it wouldn’t have this much instrumentation like an ESD, flow meter, bypass etc. With these you can have every one for between $12k—25k each depending on what pump model you want (BN5, 17 or 34) and condition of package overall. You can take four of them on a truck at a time, so shipping is easy and cheap.
Hydraulically Powered.
Optionally Converts to Electric.
You’ll need a hydraulic power package to run these. Again, we can convert these to electric if you want (watch video below), but typically oil companies will have several of these in their inventory – If not, they are laying all over the country and are reliable, simple, and cheap to overhaul.
General Equipment Configuration
Components vary from package to package depending on the removal of parts by the operator.
| Package Overview | Crimtech Services 2007 Designed for up to 285psi Inlet pressure, 300# Discharge Pressure One (1) SEEPEX BN5 OR BN17 Progressive cavity pump One (1) Gear Style Hydraulic motor direct drive to PC pump inc. male & female direct quick couplers. Optionally can convert to electric driven. |
|---|---|
| Piping & Instrumentation | 3” basket strainer (w/ drain to sump) CCS dual snap pressure switches (PSHH 100, 101) CCS dual snap temp switch (TSH 100) 1 x 1 Endress + Hauser vortex flow meter w/ bypass Hydraulic actuated, Bettis ESD control valve Skid edge piping connection: 3” 150# Inlet, 2” 600# Discharge, 1” Drains |
| Building | 9’ L x 7’ W x 9’ H Shed Style building w/ ice rakes, eaves and downspouts One (1) Single Man door with window One (1) Catadyne Heater Suction piping, basket strainer, and discharge piping piped with 1” pipe to floor Sump with grating Weighted louvers End devices wired to JB’s |
| Pricing & Availability | Located in Lloydminster, Alberta Variety of Seepex BN5 and BN17 Models. Price variance is based on visual condition and model of pump. Price Range ~$12-18k for BN5; $16-22k for BN17 “As Is, Where Is” Parts availability is good (stock to 2 weeks, local supplier). |
Photo Gallery
Additional photos of these transfer pump packages are available upon request.
360º Virtual Tour
Explore one of these packages in high-detail below. Note that this scanned unit has some instrumentation removed.
How to Read a SEEPEX Pump Curve
Watch below as Kameron Anderson demonstrates how to interpret pump curves on these Seepex pumps and accurately size the pump to your requirements.
Download Pump Curve PDFs:
Seepex BN5 Pump Curve | Seepex BN17 Pump Curve | Seepex BN35 Pump Curve
Inquiries
Call us at 403-819-3906 or fill out the form below to discuss these for sale used water transfer & oil transfer pump packages.