SOLD – 60HP 2800BBL/Day Oil Transfer Triplex Pump Package CJV1849

Description

Equipment Overview

Let’s move some oil! This Candyne built 1500ANSI rated pump package is sitting in Edmonton after a brief 6 month rental where it ran for less than 48 hours, so it’s ready to roll. Originally designed for oil transfer, it features a charge pump to boost off tanks into the triplex pump and includes spools for filtration, making it easily setup for a more conventional injection or disposal application. The building is fully wired to junction boxes and is backed by a 3 month warranty on the pump.  A 30 page quote and full drawing package is available for the high detail folks out there ;)

360º Virtual Tour

Explore this package in rich detail through a virtual walkthrough below.

Main Pumps, Motors & Assemblies

P-401 Triplex Pump:

• One (1) Reconditioned MK P323 Triplex Pump​
• c/w 3 Month Warranty​
• 2.5” Plungers Installed (Other Sizes Available)​
• Maximum Continuous RPM Rating: 500RPM​
• 2.5” NPT Suction, 2” NPT Discharge Connections​
• Rated for 63HP Continuous Duty​
• Max 2695psi
• 3 Feed Lubricator w/ Oil Reservoir Daytank​
• Sheave Kit and Aluminum Belt Guard ​
• Mounted on sub assembly skid and attached to main skid

PM-401 Motor:​

• One (1) TECO 60HP Electric Motor ​
• TEFC; 1180 RPM ​
• VFD Rated​
• 480/3/60VAC​

S-405 Suction Stabilizer: ​

• One (1) CoorsTek Suction Pulsation Stabilizers​
• 300 cu/in​
• 2.5” NPT 150#​

PD-161 Discharge Stabilizer:​

• One (1) NEW CoorsTek Discharge Pulsation Stabilizer​
• 300 cu/in​
• 2” NPT 600# (MAWP 1440PSI)

P-400 Charge Pump: ​

• One (1) ANSI MTX/LTX 1.5 x 3-10 Centrifugal Pump​
• Carbon Steel Internals​
• Rated at 6HP @ 1800RPM​

Pump Performance

F-161 Filter Vessel: ​ (Not Included)

• SPOOL PROVIDED to ACCOMMODATE FUTURE FILTER​.  Description at right  is proposed filter solution
• Filter Available Currently in Stock
• One (1) NEW 3 Bag P2 Filter
• 4” 150# RF in/out Connections ​
• Rated for 815m3/day​
• AB/BC/SK CRN Registration

M-160 Charge Pump Motor​:

• One (1) 7.5 HP TECO Motor ​
• TEFC, 1800 RPM​
• 460/3/60Hz​

Instrumentation

PI-100   Pressure Indicator 4” x ½” 0-100psi​
PI-103  Pressure Indicator 4” x ½” 0-100psi​
PI-104  Pressure Indicator 4” x ½” 0-1000psi)​
PSLL-401   Low suction pressure Shutdown Switch Low CCS DualSnap )​
PSH-401   High discharge pressure Shutdown Switch High CCS DualSnap (6900GZE20 SET TBA)​
PSV-400  Pressure Safety Valve Charge Pump Discharge​
PSV-401  Pressure Safety Valve Discharge​
VT-401  High Vibration Transmitter  ​
LSL-401  Low Oil Level Shutdown Murphy EX​
LSHH-400  Sump Level Safety Shutdown SOR

Piping

Suction Piping:  4” 150# ​

• Includes 4” Y strainer and Isolation valve​

Discharge Piping: 3” 1500

• Isolation valve​
• Check valve​
• Drain valves to drain sump

Drain Piping to be 1” and will drain into open drain sump from:

• Basket strainer drain​
• Suction piping between P-400/P-401​
• Discharge piping​
• P-161 stuffing box drain

Piping Notes

• Discharge stabilizer MAWP 1440PSI
• Built to ASME B31.3 ​
• Discharge piping to be sch. 80​
• Suction piping to be sch. 40​
• 100% X-Ray / No PWHT​
• All pipe/fittings/bolting/gasket materials to be standard ​
• Discharge Stabilizer is rated 600#

Skid & Building

• 13’ W x 19’ L x 8’ 6” Eave Never Used Skid/Building​
• ¼” Checker Plate Flooring​
• 2” Drip Lip Around Skid​
• Drain Sump w/ 2” 150# Line​
• Gable Style Building​
• Ice Rakes
• Ridge Vent​
• Eavestroughs and Downspouts​
• One (1) Double Man Door​
• One (1) Single Man Door​
• 3” Fire Retardant Spray Foam Under skid Insulation Insulated Skid

Electrical

• Two (2) Interior Lights w/ Switch​
• Two (2) Exterior Lights w/ Switch​
• One (1) High Mount Exhaust Fan​
• One (1) 10KW Electric Heater​
• One (1) 12V Electrical Receptacle​
• Two (2) ESD Buttons​
• Wired to Junction Boxes

QA/QC Documentation

Operation, Parts, Service and QA Manual provided with package c/w:​

• P&ID Dwg’s​
• Pump Curves​
• Installation and Operation manual​
• Parts and service Manual for all equipment​
• Data sheets for all equipment in package​
• QC Manual from approved shop with AQP​
• AB-83​
• U1A for Filter vessel and Pulsation stabilizers​
• P&ID

Drawings

Download as-built drawings